LSHF Cables

LSHF (Low smoke halogen free) material is used in filling & jacketing of cables with special characteristics of non toxic emissions.

LSHF Cables

LSHF (Low smoke halogen free) insulation grade for 450/750 V wires is produced as well.

LSHF Cables types

  • LSF Cables

    Fire is a complex and emotive subject, the consequences of fire can be catastrophic.

    The nature of organic material used in the cable manufacture of cables and possible installation conditions in areas of the fire risk can lead to a situation where cables may contribute to the spread of fire, emission of smoke and release of combustion products injurious to equipment and human health.

    In power stations, hospitals, theatres, hotels and other large public buildings, the loss of visibility caused by smoke evolved from burning cable materials can cause panic and create serious problems when evacuating personnel.Location of the fire source and fire fighting are also greatly hampered by smoke. Additionally the presence of corrosive gases in the smoke result in damage and failure of sensitive electrical equipment and may initiate long term deterioration of structures, as well as being injurious to the health of personnel even after short exposure.

    Awareness of this situation has lead to the development of new cable technologies and introduction by major cable users of cable types with low emission of smoke, corrosive and toxic fumes and reduced flame propagation properties.

    In considering cable systems with improved fire performance characteristics it is useful to first consider the various aspects of the effect of fire on a cable:

    • Propagation of fire along cable runs
    • Evolution of smoke leading to obstruction of exits
    • Evolution of acid gas leading to corrosion of equipment
    • Evolution of toxic fumes leading to personal injury

    LSF cables use special formulation based On non-halogenated polymers in order to restrict the generation of smoke as much as possible. Materials are carefully selected and the compounds carefully designed in order to ensure the best performance of the external sheaths, which are directly exposed to fire.

    LSF Cables manufactured by Riyadh Cables group have been designed to offer improved performance in areas where smoke and fume emission in the event of a fire would cause particular problems. Compounds used in LSF cables do not contain halogen hence, do not emit halogenated acids when burnt which help in minimizing the total cost of the damage caused by fire and generate little smoke when burned. Furthermore, the rate at which this low level of smoke is released, is very much slower than that of PVC or similar halogenated polymers.

    LSF Cables manufactured by Riyadh Cables have controlled limits on smoke evolution, when assessed by burning samples of cables in a 3 meter cube smoke chamber as per IEC 61034. Generally these cables combine the properties of low corwsive gas emission and low toxic gas emission as they are essentially halogen free when assessed by IEC 60754-1 and IEC 60754-2.

  • Vertical Flame Test for Single Cables (IEC 332-1)

    Vertical Flame Test for Single Cables (IEC 60332-1-2)

    PURPOSE

    The purpose of the test is to determine the resistance to flame propagation for single vertical cables.

    This test is not suitable for small wires with solid conductor having a diameter less than 0.8 mm or stranded conductors less than 0.5 mm² because the conductor melts before the test is completed. (See IEC 60332)

    EQUIPMENT

    1. Enclosure
    2. Burner
    3. Wedge (45°)
    4. A verticle adjustable jig
    5. Matches
    6. Ruler
    7. Stop-watch

    This test is to be conducted in a 3-sided enclosure (300mm wide, 450 mm deep and 1200 mm high) with open front and closed top and bottom. A 1 kW flame produced by a propane burner with adjustable air and gas flow is used. (This design of the burner is described in IEC 695-2-4/1)

    CALIBRATION

    The burner is calibrated by adjusting the flame to about 180 mm and the inner blue cone to 55 mm. The temperature increase is measured 95 mm above the top of the burner by using a thermocouple in a copper slug. The time for the temperature from 100 °C should be 45 s.

  • Bunch Burning Test (IEC 60332-3 SERIES)

    PURPOSE

    This standard describes a method of type approval testing to define the ability of bunched cables to restrain flame propagation in defined conditions regardless of their application, i.e. power, telecommunications (including data transmission and optical fibre cables), etc.

    Three categories (A, B and C) are defined and distinguished by test duration and the volume of non-metallic material of the sample under test. Two methods of mounting (designations F/R and F) are application to category A. Only designation F applies to categories B and C.

    EQUIPMENT

    1. Fire test rig
    2. Ladder
    3. Ignition source

  • Smoke Density 3M Test Cube (IEC 61034)

    PURPOSE

    The measurement of smoke density is an important aspect in the evaluation of the burning performance of electric cables as it is related to the evacuation of persons and accessibility for fire-fighting. The standard describe measurements of smoke emission when electric cables are burned horizontally. The light transmittance for flaming and smouldering conditions can be used when comparing different cables.

    EQUIPMENT

    1. Cube enclosure
    2. Photometric system
    3. Fire source
    4. Smoke mixer

  • Acidity (pH) and Conductivity (IEC 60754-2)

    TEST ON GASES EVOLVED DURING COMBUSTION OF ELECTRICAL CABLES

    PURPOSE

    The purpose of this test is to determine the pH and conductivity of gases evolved during the combustion of materials taken from electric cables as a function of temperature.

    PRINCIPLE OF OPERATION

    A predetermined quantity of the test material is burned in a tube furnace. The evolved gases are trapped by bubbling through bottles filled with distilled or demineralized water. The acidity is measured by determination of pH value. The conductivity of the solution is also measured.

    EQUIPMENT

    1. Test apparatus
    2. pH meter
    3. Conductivity meter
    4. Analytical balance
    5. Computer containing a measuring program
    6. Deionized water


    Cable mounted for fire test

    Fire test in progress

    Completion of fire test (The charred portion is less than the specified requirement)

  • Particulars & Guarantees Relating to Cross-linked Insulating Compound EI 5 (BS EN 50363-5)

    Cross-linked Insulating Compound having Low Emission of Corrosive Gases 

    STANDARD : BS 7211

    450 / 750 VOLTS

    Particulars & Guarantees Relating to Cross-linked Insulating Compound EI 5 (BS EN 50363-5)

    Sl. No. Description Unit Guaranteed Particulars
     1 Tensile Strength and Elongation at break :
      Minimum Tensile Strength  N/mm²  10
      Minimum Elongation at break  %  125
     2 Properties after ageing for specified period at specified temperatore followed by tensile strength and elongation at break test
      Number of days ageing    7
      Ageing temperature  °C  135 ± 2
      Tensile Strength after ageing :    
      Minimum value  N/mm²  -
      Maximum variation  %  30
      Elongation at break after ageing :    
      Minimum value  %  -
      Minimum variation from unaged value  %  30
     3 Low temperature bend test :
      Temperature at which specimen shall not crack  °C  -15 ± 2
     4 Low temperature elongation test :
      Test temperature  °C  -15 ± 2
      Minimum Elongation  %  30
     5 Low temperature Impact test :
      Temperature at which specimen shall not crack  °C  -15 ± 2
     6 Ozone resistance test :
      Temperature at which specimen shall not crack  °C  25 ± 2
      Duration  hours  24
     6a Ozone Concentration  ppm  250 to 300
      Alternate Ozone resistance test (Low Concentration) :    
      Temperature at which specimen shall not crack  °C  40 ± 2
      Duration  hours  72
      Ozone Concentration  ppm  200 ± 50
     7 Hot Set Test :
      Test temperature  °C  200 ± 3
      Time under Load  minutes  15
      Mechanical Stress  N/mm²  0.2
      Maximum elongation under Load  %  100
      Maximum permanent elongation after cooling  %  25
     8 Pressure test at high temperature :
      Force exerted by the blade with a k value of 1.0  BS EN  60811-3-1 CI. 8.1
      Duration of heating under load  BS EN  60811-3-1 CI. 8.1
      Test temperature  °C  100 ± 2
      Maximum indentation  %  50
     9 Acidic (corrosive) gases evolved :
      Level of HCL  %  < 0.5
      pH (minimum)  BSEN 50267  4.3
      Conductivity (maximum) (µS/mm)  BSEN 50267  10
  • Particulars & Guarantees Relating to XLPE Insulation

    XLPE INSULATION 

    STANDARD : IEC 60502-1

    SASO 1694, BS 6724, BS 7655

    Particulars & Guarantees Relating to XLPE Insulation

    Sl. No. Description Unit Guaranteed Particulars
     1 Tensile Strength and Elongation at break :
      Min. tensile strength  N/mm²  12.5
      Mln. elongation at break  %  200
     2 Accelecated ageing for specified period at specified temperature followed by tensile strength and elongation at break
      No. of days ageing  Days  
      Ageing tempecature  °C  135 ± 3
      Max. variation of tensile strength from unaged specimen  %  ± 25
      Max. variation of elongation from unaged specimen  %  ± 25
     3 Hot Set Test:
      Treatment    
      - Tempecature  °C  200 ± 3
      - Time under load  Minutes  15
      - Mechanical stress  N/cm²  20
      Max. elongation under load  %  175
      Max. permanent elongation after cooling  %  15
     4 Water Absorptlon :
      Treatment :    
      - Temperature  °C  85 ± 2
      - Duration  Days  14
      Max. variation of mass  mg/cm²  1.0
     5 Maximum permissible shrinkage :
      Treatment :    
      - Tempecature  °C  130 ± 3
      - Duration  Hours  1
      Maximum permissible shrinkage  %  4
     6 Insulatlon Resistance constant
      (KI) at maximum rated tempecatu'e (90°C)  M.Ohm.Km  3.67
     7 Volume Resistivity at maximum rated temperature (90°C)  Ohm.cm  1012
     8 Acidic emlsslon.and corrosive gases evolved
      Level of HCI  %  < 0.5
      Fluorine Content  %  < 0.1
      pH Minimum    4.3
      Conductivity  μ S/mm  10
  • Particulars & Guarantees Relating to LSF Outer Sheath Type ST8 (IEC 60502 - 1)

    LSF OUTER SHEATH 

    STANDARD : IEC 60502 - 1

    600 / 1000 VOLTS

    Particulars & Guarantees Relating to LSF Outer Sheath Type ST8 (IEC 60502 - 1)

    Sl. No. Description Unit Guaranteed Particulars
     1 Tensile Strength and Elongation at break :
      Minimum Tensile strength  N/mm²  9
      Minimum Elongation at break  %  125
     2 Properties after ageing for specified period at specified temperature followed by tensile strength and elongation at break test
      Number of days ageing    7
      Ageing temperature  °C  100 ± 2
      Tensile Strength after ageing :    
      Minimum value  N/mm²  9
      Maximum variation  %  40
      Elongation at break after ageing :    
      Minimum Value  %  100
      Maximum variation from unaged value  %  40
     3 Low temperature bend test :
      Temperature at which specimen shall not crack  °C  -15 ± 2
     4 Low temperature elongation test :
      Test temperature  °C  -15 ± 2
      Minimum Elongation  %  20
     5 Low temperature impact test :
      Temperature at which specimen shall not crack  °C  -15 ± 2
     6 Pressure test at high temperature :
      Test temperature  °C  80 ± 2
      Maximum indentation  %  50
     7 Water Absorption
      Ageing : Number of hours    24
      Ageing temperature  °C  70 ± 2
      Maximum increase in Mass  mg/cm²  10
     8 Acidic emission and corrosive gases evolved
      Level of HCI  %  < 0.5
      Fluorine Content  %  < 0.1
      pH Minimum    4.3
      Conductivity  μ S/mm  10
  • Particulars & Guarantees Relating to LSF Outer Sheath Type LTS 1 (BS 7655)

    LSF OUTER SHEATH 

    STANDARD : BS 6724, BS 7655

    600 / 1000 VOLTS

    Particulars & Guarantees Relating to LSF Outer Sheath Type LTS 1 (BS 7655)

    Sl. No. Description Unit Guaranteed Particulars
     1 Tensile Strength and Elongation at break :
      Minimum Tensile strength  N/mm²  10
      Minimum Elongation at break  %  100
     2 Properties after ageing for specified period at specified temperature followed by tensile strength and elongation at break test
      Number of days ageing    7
      Ageing temperature  °C  100 ± 2
      Tensile Strength after ageing :    
      Minimum value  N/mm²  10
      Maximum variation  %  40
      Elongation at break after ageing :    
      Minimum Value  %  100
      Maximum variation from unaged value  %  40
     3 Low temperature bend test :
      Temperature at which specimen shall not crack  °C  -15 ± 2
     4 Low temperature elongation test :
      Test temperature  °C  -15 ± 2
      Minimum Elongation  %  30
     5 Low temperature impact test :
      Temperature at which specimen shall not crack  °C  -15 ± 2
     6 Pressure test at high temperature :
      Test temperature  °C  80 ± 2
      Maximum indentation  %  50
     7 Tear Resistance Test as per BS 6469 (sec. 99.1)
      Minimum Value  N/mm  5
     8 Water Immersion Test as per BS 6469 (sec. 99.1)
      Number of days ageing    7
      Ageing temperature  °C  70 ± 2
      Maximum variation in tensile strength  %  30
      Maximum variation in elongation at break  %  30
     9 Acidic emission and corrosive gases evolved
      Level of HCI  %  < 0.5
  • 450 - 750 VOLTS Copper Conductor LSF insulated Wires to BS 7211 (HO7Z-U with Solid Conductor)

    450 - 750 VOLTS Copper Conductor LSF insulated Wires to BS 7211 

    HO7Z-U with Solid Conductor

    For internal wiring of equipment rated voltage up to 1000 V AC and up to 750 V DC to earth.


    Item Code

    Nominal Cross Section
    Conductor
    Insulation Thickness

    Overall Diameter

    Weight of Finished Cable Approx

    Maximum DC Resistance at 20°C

    Standard Packing Length
    Number of Wires in Conductor Diameter of Conductor Approx.
      mm² No mm mm mm Kg/Km Ohm/Km M±5%
    0C063004xx 1x1.5 1 1.38 0.7 3.0 20 12.1 100 C
    0C063005xx 1x2.5 1 1.78 0.8 3.5 30 7.41 100 C
    0C063006xx 1x4 1 2.25 0.8 4.0 50 4.61 100 C
    0C063007xx 1x6 1 2.76 0.8 5.0 65 3.08 100 C
    0C063008xx 1x10 1 3.57 1.0 6.0 110 1.83 100 C
    Color Green/Yellow Blue Black Green Red Yellow Brown Grey Orange White
    Code 01 02 03 04 05 06 07 08 09 10

    For required colour replace the last two digits - xx, by color code.

  • 450 - 750 VOLTS Copper Conductor LSF insulated Wires to BS 7211 (HO7Z-R with Stranded Conductor)

    450 - 750 VOLTS Copper Conductor LSF insulated Wires to BS 7211 

    HO7Z-R with Stranded Conductor

    For internal wiring of equipment rated voltage up to 1000 V AC and up to 750 V DC to earth.


    Item Code

    Nominal Cross Section
    Conductor
    Insulation Thickness

    Overall Diameter

    Weight of Finished Cable Approx

    Maximum DC Resistance at 20°C

    Standard Packing Length
    Number of Wires in Conductor Diameter of Conductor Approx.
      mm² No mm mm mm Kg/Km Ohm/Km M±5%
    0C063104xx 1x1.5 7 1.50 0.7 3.0 20 12.1 100 C
    0C063105xx 1x2.5 7 12.00 0.8 3.7 35 7.41 100 C
    0C063106xx 1x4 7 2.60 0.8 4.2 50 4.61 100 C
    0C063107xx 1x6 7 3.10 0.8 4.8 70 3.08 100 C
    0C063108xx 1x10 7 4.00 1.0 6.0 115 1.83 100 C
    0C063109xx 1x16 7 5.00 1.0 7.0 170 1.15 100 C
    0C063110xx 1x25 7 6.30 1.2 8.7 265 0.727 100 C
    0C063111xx 1x35 7 7.40 1.2 10.0 360 0.524 100 C
    000631xx12 1x50 19 8.80 1.4 11.6 485 0.387 3000 D
    000631xx13 1x70 19 10.60 1.4 13.4 685 0.268 3000 D
    000631xx14 1x95 19 12.40 1.6 15.6 950 0.193 3000 D
    000631xx15 1x120 37 14.00 1.6 17.5 1175 0.153 2000 D
    000631xx16 1x150 37 15.50 1.8 19.0 1450 0.124 2000 D
    000631xx17 1x185 37 17.40 2.0 21.5 1825 0.0991 2000 D
    000631xx18 1x240 61 20.00 2.2 25.0 2375 0.0754 1000 D
    000631xx19 1x300 61 22.50 2.4 27.5 2980 0.0601 1000 D
    000631xx20 1x400 61 25.50 2.6 31.0 3800 0.047 500 D
    000631xx21 1x500 61 28.50 2.8 35.0 4850 0.0366 500 D
    000631xx22 1x630 91 32.80 2.8 39.0 6250 0.0283 500 D
    Color Green/Yellow Blue Black Green Red Yellow Brown Grey Orange White
    Code 01 02 03 04 05 06 07 08 09 10

    For required colour replace the last two digits - xx, by color code.

  • 450 - 750 VOLTS Copper Conductor LSF insulated Wires to BS 7211 (HO7Z-K with Flexible Conductor)

    450 - 750 VOLTS Copper Conductor LSF insulated Wires to BS 7211 

    HO7Z-K with Flexible Conductor

    For internal wiring of equipment rated voltage up to 1000 V AC and up to 750 V DC to earth.


    Item Code

    Nominal Cross Section
    Conductor
    Insulation Thickness

    Overall Diameter

    Weight of Finished Cable Approx

    Maximum DC Resistance at 20°C

    Standard Packing Length
    Number of Wires in Conductor Diameter of Conductor Approx.
      mm² No x mm mm mm mm Kg/Km Ohm/Km M±5%
    0C063504xx 1.x1.5 27x0.25 1.55 0.7 3.0 20 13.3 100 C
    0C063505xx 1x2.5 46x0.25 2.00 0.8 3.6 30 7.98 100 C
    0C063506xx 1x4 51x0.30 2.50 0.8 4.1 45 4.95 100 C
    0C063507xx 1x6 77x0.30 3.00 0.8 4.7 65 3.3 100 C
    0C063508xx 1x10 74x0.40 4.00 1.0 6.1 105 1.91 100 C
    0C063509xx 1x16 118x0.40 5.10 1.0 7.1 165 1.21 100 C
    0C063510xx 1x25 182x0.40 6.40 1.2 9.0 250 0.78 100 C
    0C063511xx 1x35 257x0.40 7.50 1.2 10.0 350 0.554 100 C
    000635xx12 1x50 371x0.40 9.00 1.4 12.0 500 0.386 1000 D
    000635xx13 1x70 336x0.50 10.70 1.4 14.0 685 0.272 1000 D
    000635xx14 1x95 444x0.50 12.30 1.6 16.0 900 0.206 1000 D
    000635xx15 1x120 568x0.50 14.00 1.6 18.0 1150 0.161 1000 D
    000635xx16 1x150 708x0.50 15.60 1.8 20.0 1425 0.129 1000 D
    000635xx17 1x185 864x0.50 17.20 2.0 22.0 1725 0.106 1000 D
    000635xx18 1x240 1134x0.50 20.00 2.2 25.0 2250 0.0801 1000 D
    000635xx19 1x300 1414x0.50 22.00 2.4 27.0 2800 0.0641 1000 D
    Color Green/Yellow Blue Black Green Red Yellow Brown Grey Orange White
    Code 01 02 03 04 05 06 07 08 09 10

    For required colour replace the last two digits - xx, by color code.

  • XLPE Insulated LSF Sheathed Cables (IEC 60502 - 1), COPPER CONDUCTORS

    XLPE INSULATED, LSF SHEATHED CABLES

    Copper Conductor

    STANDARD : IEC 60502-1

    600 / 1000 VOLTS

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     1x1.5 re 1 1.38 0.7
     1x1.5 rm 7 1.56 0.7
     1x2.5 re 1 1.78 0.7
     1x2.5 rm 7 2.01 0.7
     1x4 re 1 2.25 0.7
     1x4 rm 7 2.55 0.7
     1x6 re 1 2.76 0.7
     1x6 rm 7 3.12 0.7
     1x10 rm 7 4.01 0.7
     1x16 rm 7 5.03 0.7
     1x25 rm 7 6.3 0.9
     1x35 rm 7 7.44 0.9
     1x50 rm 19 8.8 1.0
     1x70 rm 19 10.6 1.1
     1x95 rm 19 12.4 1.1
     1x120 rm 37 14 1.2
     1x150 rm 37 15.5 1.4
     1x185 rm 37 17.4 1.6
     1x240 rm 61 20 1.7
     1x300 rm 61 22.5 1.8
     1x400 rm 61 25.4 2.0
     1x500 rm 61 28.5 2.2
     1x630 rm 91 32.8 2.4

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
    1.4 6 45 1000
    1.4 6 50 1000
    1.4 7 60 1000
    1.4 7 60 1000
    1.4 7 75 1000
    1.4 8 80 1000
    1.4 8 95 1000
    1.4 8 100 1000
    1.4 9 145 1000
    1.4 10 200 1000
    1.4 11 300 1000
    1.4 13 400 1000
    1.4 14 525 1000
    1.4 16 725 1000
    1.5 18 1000 1000
    1.5 20 1225 1000
    1.6 22 1500 1000
    1.7 24 1875 1000
    1.8 27 2450 1000
    1.9 30 3050 1000
    2.0 34 3900 500
    2.1 37 4975 500
    2.2 42 6425
    500
    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     2x1.5 re 1 1.38 0.7
     2x1.5 rm 7 1.56 0.7
     2x2.5 re 1 1.78 0.7
     2x2.5 rm 7 2.01 0.7
     2x4 re 1 2.25 0.7
     2x4 rm 7 2.55 0.7
     2x6 re 1 2.76 0.7
     2x6 rm 7 3.12 0.7
     2x10 rm 7 4.01 0.7
     2x16 rm 7 5.03 0.7
     2x25 rm 7 6.3 0.9
     2x35 rm 7 7.44 0.9

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
     1.8 12 175 1000
     1.8 13 200 1000
     1.8 13 225 1000
     1.8 13 225 1000
     1.8 14 275 1000
     1.8 14 275 1000
     1.8 15 325 1000
     1.8 16 350 1000
     1.8 17 475 1000
     1.8 19 650 1000
     1.8 23 925 1000
     1.8 25 1200 1000
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    1 core : Black (Red on request)
    2 cores : Red, Black
    1 Core : Brown or Blue
    2 Core : Brown, Blue
    Overall diameter -2%, +8%
    Packing ±5%

    Single core cables are Aluminium Armoured as per IEC 60502-1 recommendation. 

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     3x1.5 re 1 1.38 0.7
     3x1.5 rm 7 1.56 0.7
     3x2.5 re 1 1.78 0.7
     3x2.5 rm 7 2.01 0.7
     3x4 re 1 2.25 0.7
     3x4 rm 7 2.55 0.7
     3x6 re 1 2.76 0.7
     3x6 rm 7 3.12 0.7
     3x10 rm 7 4.01 0.7
     3x16 rm 7 5.03 0.7
     3x25 rm 7 6.3 0.9
     3x35 rm 7 7.44 0.9
     3x50 sm 6 - 1.0
     3x70 sm 12 - 1.1
     3x95 sm 15 - 1.1
     3x120 sm 18 - 1.2
     3x150 sm 18 - 1.4
     3x185 sm 30 - 1.6
     3x240 sm 34 - 1.7
     3x300 sm 34 - 1.8
     3x400 sm 53 - 2.0
     3x500 sm 53 - 2.2

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
    1.8 13 200 1000
    1.8 13 210 1000
    1.8 13 250 1000
    1.8 14 275 1000
    1.8 14 325 1000
    1.8 15 325 1000
    1.8 15 400 1000
    1.8 16 400 1000
    1.8 18 575 1000
    1.8 20 800 1000
    1.8 24 1150 1000
    1.8 27 1375 1000
    1.8 27 1675 1000
    1.9 31 2350 500
    2.0 34 3150 500
    2.1 37 3875 500
    2.3 42 4825 500
    2.4 46 5950 500
    2.6 51 7725 500
    2.8 56 9575 500
    3.1 64 12175 250
    3.3 71 15500 250
    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    Ph Ne Ph Ne Ph Ne  
     3x10 rm+6 7 7 4.01 3.12 0.7 0.7
     3x16 rm+10 7 7 5.03 4.01 0.7 0.7
     3x25 rm+16 7 7 6.3 5.03 0.9 0.7
     3x35 sm+16 6 7 - 5.03 0.9 0.7
     3x50 sm+25 6 7 - 6.30 1.0 0.9
     3x70 sm+35 12 7 - 7.44 1.1 0.9
     3x95 sm+50 15 19 - 8.80 1.1 1.0
     3x120 sm+70 18 19 - 10.60 1.2 1.1
     3x150 sm+70 18 19 - 10.60 1.4 1.1
     3x185 sm+95 30 19 - 12.40 1.6 1.1
     3x240 sm+120 34 37 - 14.00 1.7 1.2
     3x300 sm+150 34 37 - 15.50 1.8 1.4
     3x400 sm+185 53 37 - 17.40 2.0 1.6
     3x500 sm+240 53 61 - 20.00 2.2 1.7

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
    1.8 19 640 1000
    1.8 22 900 1000
    1.8 25 1325 1000
    1.8 25 1475 1000
    1.8 29 1950 1000
    1.9 33 2750 500
    2.1 37 3675 500
    2.2 40 4600 500
    2.3 45 5550 500
    2.5 50 6975 500
    2.7 55 9275 500
    2.9 61 11150 250
    3.1 68 14500 250
    3.4 76 18050 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    sm : Sectoral Stranded
    3 cores : Red, Yellow, Blue
    31/2 cores : Red, Yellow, Blue, Black
    3 Cores : Brown, Black, Grey
    3 1/2 Cores : Blue, Brown, Black, Grey
    Overall diameter -2%, +8%
    Packing ±5%

    For 31/2 core, neutral conductors are round stranded.
    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 228.
     

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     4x1.5 re 1 1.38 0.7
     4x1.5 rm 7 1.56 0.7
     4x2.5 re 1 1.78 0.7
     4x2.5 rm 7 2.01 0.7
     4x4 re 1 2.25 0.7
     4x4 rm 7 2.55 0.7
     4x6 re 1 2.76 0.7
     4x6 rm 7 3.12 0.7
     4x10 rm 7 4.01 0.7
     4x16 rm 7 5.03 0.7
     4x25 rm 7 6.3 0.9
     4x35 sm 6 - 0.9
     4x50 sm 6 - 1.0
     4x70 sm 12 - 1.1
     4x95 sm 15 - 1.1
     4x120 sm 18 - 1.2
     4x150 sm 18 - 1.4
     4x185 sm 30 - 1.6
     4x240 sm 34 - 1.7
     4x300 sm 34 - 1.8
     4x400 sm 53 - 2.0
     4x500 sm 53 - 2.2

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
    1.8 13 230 1000
    1.8 14 250 1000
    1.8 14 300 1000
    1.8 15 300 1000
    1.8 15 375 1000
    1.8 16 400 1000
    1.8 17 475 1000
    1.8 17 500 1000
    1.8 20 700 1000
    1.8 22 975 1000
    1.8 26 1450 1000
    1.8 26 1650 1000
    1.9 30 2175 1000
    2.0 34 3050 500
    2.1 38 4100 500
    2.3 43 5125 500
    2.4 47 6300 500
    2.6 52 7825 500
    2.8 58 10150 500
    3.0 64 12575 500
    3.3 73 16075 250
    3.5 80 20375 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    sm : Sectoral Stranded
    4 cores : Red, Yellow, Blue, Black 4 Cores : Blue, Brown, Black, Grey Overall diameter -2%, +8%
    Packing ±5%

    For sectoral conductors, number of wires mentioned is minimum of wires in accordance with IEC 228. 

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     1x1.5 re 1 1.38 0.7
     1x1.5 rm 7 1.56 0.7
     1x2.5 re 1 1.78 0.7
     1x2.5 rm 7 2.01 0.7
     1x4 re 1 2.25 0.7
     1x4 rm 7 2.55 0.7
     1x6 re 1 2.76 0.7
     1x6 rm 7 3.12 0.7
     1x10 rm 7 4.01 0.7
     1x16 rm 7 5.03 0.7
     1x25 rm 7 6.3 0.9
     1x35 rm 7 7.44 0.9
     1x50 rm 19 8.8 1.0
     1x70 rm 19 10.6 1.1
     1x95 rm 19 12.4 1.1
     1x120 rm 37 14 1.2
     1x150 rm 37 15.5 1.4
     1x185 rm 37 17.4 1.6
     1x240 rm 61 20 1.7
     1x300 rm 61 22.5 1.8
     1x400 rm 61 25.4 2.0
     1x500 rm 61 28.5 2.2
     1x630 rm 91 32.8 2.4

    ALUMINIUM WIRE ARMOURED
    Nominal Alum Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    0.8 1.8 16 475 1000
    0.8 1.8 17 575 1000
    1.25 1.8 19 775 1000
    1.25 1.8 21 1000 1000
    1.25 1.8 23 1300 1000
    1.6 1.8 26 1600 1000
    1.6 1.8 28 1925 1000
    1.6 1.8 30 2325 1000
    1.6 1.9 33 2950 500
    1.6 1.9 36 3575 500
    2.0 2.1 40 4650 500
    2.0 2.2 44 5775 500
    2.0 2.3 49 7325 500

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     2x1.5 re 1 1.38 0.7
     2x1.5 rm 7 1.56 0.7
     2x2.5 re 1 1.78 0.7
     2x2.5 rm 7 2.01 0.7
     2x4 re 1 2.25 0.7
     2x4 rm 7 2.55 0.7
     2x6 re 1 2.76 0.7
     2x6 rm 7 3.12 0.7
     2x10 rm 7 4.01 0.7
     2x16 rm 7 5.03 0.7
     2x25 rm 7 6.3 0.9
     2x35 rm 7 7.44 0.9

    STEEL WIRE ARMOURED
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    0.8 1.8 15 450 1000
    0.8 1.8 16 475 1000
    0.8 1.8 16 525 1000
    0.8 1.8 17 550 1000
    1.25 1.8 20 835 1000
    1.25 1.8 22 1050 1000
    1.6 1.8 26 1575 1000
    1.6 1.8 28 1900 1000
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    1 core : Black (Red on request)
    2 cores : Red, Black
    1 Core : Brown or Blue
    2 Core : Brown, Blue
    Overall diameter -2%, +8%
    Packing ±5%

    Single core cables are Aluminium Armoured as per IEC 60502-1 recommendation. 

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     3x1.5 re 1 1.38 0.7
     3x1.5 rm 7 1.56 0.7
     3x2.5 re 1 1.78 0.7
     3x2.5 rm 7 2.01 0.7
     3x4 re 1 2.25 0.7
     3x4 rm 7 2.55 0.7
     3x6 re 1 2.76 0.7
     3x6 rm 7 3.12 0.7
     3x10 rm 7 4.01 0.7
     3x16 rm 7 5.03 0.7
     3x25 rm 7 6.3 0.9
     3x35 rm 7 7.44 0.9
     3x50 sm 6 - 1.0
     3x70 sm 12 - 1.1
     3x95 sm 15 - 1.1
     3x120 sm 18 - 1.2
     3x150 sm 18 - 1.4
     3x185 sm 30 - 1.6
     3x240 sm 34 - 1.7
     3x300 sm 34 - 1.8
     3x400 sm 53 - 2.0
     3x500 sm 53 - 2.2

    STEEL WIRE ARMOURED
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    0.8 1.8 17 525 1000
    0.8 1.8 17 575 1000
    0.8 1.8 18 625 1000
    1.25 1.8 21 950 1000
    1.25 1.8 23 1225 1000
    1.6 1.8 27 1825 1000
    1.6 1.8 30 2125 1000
    1.6 1.9 30 2450 1000
    2.0 2.0 35 3475 500
    2.0 2.2 38 4400 500
    2.0 2.3 42 5250 500
    2.5 2.5 47 6775 500
    2.5 2.6 51 8075 500
    2.5 2.8 57 10125 500
    2.5 3.0 62 12175 250
    2.5 3.3 70 15150 250
    3.15 3.5 78 19750 250
    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness

    Ph
    Ne
    Ph
    Ne
    Ph
     Ne
     3x10 rm+6 7 7 4.01 3.12 0.7 0.7
     3x16 rm+10 7 7 5.03 4.01 0.7 0.7
     3x25 rm+16 7 7 6.3 5.03 0.9 0.7
     3x35 sm+16 6 7 - 5.03 0.9 0.7
     3x50 sm+25 6 7 - 6.30 1.0 0.9
     3x70 sm+35 12 7 - 7.44 1.1 0.9
     3x95 sm+50 15 19 - 8.80 1.1 1.0
     3x120 sm+70 18 19 - 10.60 1.2 1.1
     3x150 sm+70 18 19 - 10.60 1.4 1.1
     3x185 sm+95 30 19 - 12.40 1.6 1.1
     3x240 sm+120 34 37 - 14.00 1.7 1.2
     3x300 sm+150 34 37 - 15.50 1.8 1.4
     3x400 sm+185 53 37 - 17.40 2.0 1.6
     3x500 sm+240 53 61 - 20.00 2.2 1.7

    STEEL WIRE ARMOURED
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    1.25 1.8 22 1050 1000
    1.25 1.8 24 1350 1000
    1.6 1.8 28 2000 1000
    1.6 1.8 28 2175 1000
    1.6 1.9 32 2775 500
    2.0 2.1 37 3950 500
    2.0 2.2 41 5000 500
    2.0 2.4 45 6100 500
    2.5 2.5 50 7650 500
    2.5 2.7 55 9275 500
    2.5 2.9 61 11575 250
    2.5 3.0 66 13900 250
    3.15 3.4 76 18250 250
    3.15 3.6 83 22650 250
    Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :  
    re : Round Solid 
    rm : Round Stranded
    sm : Sectoral Stranded
    3 cores : Red, Yellow, Blue
    31/2 cores : Red, Yellow, Blue, Black
    3 Cores : Brown, Black, Grey
    3 1/2 Cores : Blue, Brown, Black, Grey
    Overall diameter -2%, +8%
    Packing ±5%

    For 31/2 core, neutral conductors are round stranded.
    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 228.

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     4x1.5 re 1 1.38 0.7
     4x1.5 rm 7 1.56 0.7
     4x2.5 re 1 1.78 0.7
     4x2.5 rm 7 2.01 0.7
     4x4 re 1 2.25 0.7
     4x4 rm 7 2.55 0.7
     4x6 re 1 2.76 0.7
     4x6 rm 7 3.12 0.7
     4x10 rm 7 4.01 0.7
     4x16 rm 7 5.03 0.7
     4x25 rm 7 6.3 0.9
     4x35 sm 6 - 0.9
     4x50 sm 6 - 1.0
     4x70 sm 12 - 1.1
     4x95 sm 15 - 1.1
     4x120 sm 18 - 1.2
     4x150 sm 18 - 1.4
     4x185 sm 30 - 1.6
     4x240 sm 34 - 1.7
     4x300 sm 34 - 1.8
     4x400 sm 53 - 2.0
     4x500 sm 53 - 2.2

    STEEL WIRE ARMOURED
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    0.8 1.8 18 600 1000
    1.25 1.8 19 800 1000
    1.25 1.8 20 850 1000
    1.25 1.8 22 1100 1000
    1.6 1.8 25 1600 1000
    1.6 1.8 29 2175 1000
    1.6 1.9 30 2400 1000
    1.6 2.0 33 3025 500
    2.0 2.2 39 4325 500
    2.0 2.3 43 5500 500
    2.5 2.5 48 7075 500
    2.5 2.6 52 8425 500
    2.5 2.8 57 10200 500
    2.5 3.0 64 12850 250
    2.5 3.2 70 15550 250
    3.15 3.5 80 20450 250
    3.15 3.8 88 25225 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    sm : Sectoral Stranded
    3 cores : Red, Yellow, Blue
    31/2 cores : Red, Yellow, Blue, Black
    4 Cores : Blue, Brown, Black, Grey Overall diameter -2%, +8%
    Packing ±5%

    For 31/2 core, neutral conductors are round stranded.
    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 228.
     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     1x1.5 re 1 1.38 0.7
     1x1.5 rm 7 1.56 0.7
     1x2.5 re 1 1.78 0.7
     1x2.5 rm 7 2.01 0.7
     1x4 re 1 2.25 0.7
     1x4 rm 7 2.55 0.7
     1x6 re 1 2.76 0.7
     1x6 rm 7 3.12 0.7
     1x10 rm 7 4.01 0.7
     1x16 rm 7 5.03 0.7
     1x25 rm 7 6.3 0.9
     1x35 rm 7 7.44 0.9
     1x50 rm 19 8.8 1.0
     1x70 rm 19 10.6 1.1
     1x95 rm 19 12.4 1.1
     1x120 rm 37 14 1.2
     1x150 rm 37 15.5 1.4
     1x185 rm 37 17.4 1.6
     1x240 rm 61 20 1.7
     1x300 rm 61 22.5 1.8
     1x400 rm 61 25.4 2.0
     1x500 rm 61 28.5 2.2
     1x630 rm 91 32.8 2.4

    ALUMINIUM TAPE ARMOURED
    Nominal Alum Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    0.5 1.8 16 475 1000
    0.5 1.8 17 575 1000
    0.5 1.8 19 725 1000
    0.5 1.8 21 975 1000
    0.5 1.8 23 1250 1000
    0.5 1.8 24 1500 1000
    0.5 1.8 26 1800 1000
    0.5 1.8 29 2175 1000
    0.5 1.8 31 2775 500
    0.5 1.9 34 3400 500
    0.5 2.0 38 4325 500
    0.5 2.1 42 5450 500
    0.5 2.3 47 6950 500

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     2x1.5 re 1 1.38 0.7
     2x1.5 rm 7 1.56 0.7
     2x2.5 re 1 1.78 0.7
     2x2.5 rm 7 2.01 0.7
     2x4 re 1 2.25 0.7
     2x4 rm 7 2.55 0.7
     2x6 re 1 2.76 0.7
     2x6 rm 7 3.12 0.7
     2x10 rm 7 4.01 0.7
     2x16 rm 7 5.03 0.7
     2x25 rm 7 6.3 0.9
     2x35 rm 7 7.44 0.9

    STEEL TAPE ARMOURED
    Nominal Steel Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    0.2 1.8 15 350 1000
    0.2 1.8 15 375 1000
    0.2 1.8 16 400 1000
    0.2 1.8 16 450 1000
    0.2 1.8 18 575 1000
    0.2 1.8 20 750 1000
    0.2 1.8 24 1075 1000
    0.2 1.8 26 1350 1000
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    1 core : Black (Red on request)
    2 cores : Red, Black
    1 Core : Brown or Blue
    2 Core : Brown, Blue
    Overall diameter -2%, +8%
    Packing ±5%

    Single core cables are Aluminium Armoured as per IEC 60502-1 recommendation. 

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     3x1.5 re 1 1.38 0.7
     3x1.5 rm 7 1.56 0.7
     3x2.5 re 1 1.78 0.7
     3x2.5 rm 7 2.01 0.7
     3x4 re 1 2.25 0.7
     3x4 rm 7 2.55 0.7
     3x6 re 1 2.76 0.7
     3x6 rm 7 3.12 0.7
     3x10 rm 7 4.01 0.7
     3x16 rm 7 5.03 0.7
     3x25 rm 7 6.3 0.9
     3x35 rm 7 7.44 0.9
     3x50 sm 6 - 1.0
     3x70 sm 12 - 1.1
     3x95 sm 15 - 1.1
     3x120 sm 18 - 1.2
     3x150 sm 18 - 1.4
     3x185 sm 30 - 1.6
     3x240 sm 34 - 1.7
     3x300 sm 34 - 1.8
     3x400 sm 53 - 2.0
     3x500 sm 53 - 2.2

    STEEL TAPE ARMOURED
    Nominal Steel Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    0.2 1.8 16 410 1000
    0.2 1.8 16 475 1000
    0.2 1.8 17 500 1000
    0.2 1.8 19 675 1000
    0.2 1.8 21 900 1000
    0.2 1.8 25 1300 1000
    0.2 1.8 27 1525 1000
    0.2 1.8 28 1850 1000
    0.2 2.0 32 2550 500
    0.2 2.1 35 3375 500
    0.5 2.3 40 4500 500
    0.5 2.4 44 5475 500
    0.5 2.6 48 6700 500
    0.5 2.7 54 8550 250
    0.5 2.9 59 10475 250
    0.5 3.2 66 13200 250
    0.5 3.4 73 16625 250
    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    Ph Ne Ph Ne Ph Ne
     3x10 rm+6 7 7 4.01 3.12 0.7 0.7
     3x16 rm+10 7 7 5.03 4.01 0.7 0.7
     3x25 rm+16 7 7 6.3 5.03 0.9 0.7
     3x35 sm+16 6 7 - 5.03 0.9 0.7
     3x50 sm+25 6 7 - 6.30 1.0 0.9
     3x70 sm+35 12 7 - 7.44 1.1 0.9
     3x95 sm+50 15 19 - 8.80 1.1 1.0
     3x120 sm+70 18 19 - 10.60 1.2 1.1
     3x150 sm+70 18 19 - 10.60 1.4 1.1
     3x185 sm+95 30 19 - 12.40 1.6 1.1
     3x240 sm+120 34 37 - 14.00 1.7 1.2
     3x300 sm+150 34 37 - 15.50 1.8 1.4
     3x400 sm+185 53 37 - 17.40 2.0 1.6
     3x500 sm+240 53 61 - 20.00 2.2 1.7

    STEEL TAPE ARMOURED
    Nominal Steel Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.2 1.8 20 750 1000
    0.2 1.8 22 1025 1000
    0.2 1.8 26 1475 1000
    0.2 1.8 26 1625 1000
    0.2 1.9 30 2150 1000
    0.2 2.0 34 2950 500
    0.5 2.2 39 4250 500
    0.5 2.3 43 5250 500
    0.5 2.5 47 6275 500
    0.5 2.6 52 7775 500
    0.5 2.8 58 9900 500
    0.5 3.0 63 12125 250
    0.5 3.3 71 15250 250
    0.8 3.5 78 19275 250
    Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :  
    re : Round Solid 
    rm : Round Stranded
    sm : Sectoral Stranded
    3 cores : Red, Yellow, Blue
    31/2 cores : Red, Yellow, Blue, Black
    3 Cores : Brown, Black, Grey
    3 1/2 Cores : Blue, Brown, Black, Grey
    Overall diameter -2%, +8%
    Packing ±5%

    For 31/2 core, neutral conductors are round stranded.
    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 228.

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     4x1.5 re 1 1.38 0.7
     4x1.5 rm 7 1.56 0.7
     4x2.5 re 1 1.78 0.7
     4x2.5 rm 7 2.01 0.7
     4x4 re 1 2.25 0.7
     4x4 rm 7 2.55 0.7
     4x6 re 1 2.76 0.7
     4x6 rm 7 3.12 0.7
     4x10 rm 7 4.01 0.7
     4x16 rm 7 5.03 0.7
     4x25 rm 7 6.3 0.9
     4x35 sm 6 - 0.9
     4x50 sm 6 - 1.0
     4x70 sm 12 - 1.1
     4x95 sm 15 - 1.1
     4x120 sm 18 - 1.2
     4x150 sm 18 - 1.4
     4x185 sm 30 - 1.6
     4x240 sm 34 - 1.7
     4x300 sm 34 - 1.8
     4x400 sm 53 - 2.0
     4x500 sm 53 - 2.2

    STEEL TAPE ARMOURED
    Nominal Steel Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    - - - - -
    0.2 1.8 17 475 1000
    0.2 1.8 17 550 1000
    0.2 1.8 18 600 1000
    0.2 1.8 20 800 1000
    0.2 1.8 23 1100 1000
    0.2 1.8 27 1600 1000
    0.2 1.8 27 1800 1000
    0.2 1.9 31 2350 1000
    0.2 2.1 35 3275 500
    0.5 2.3 41 4725 500
    0.5 2.4 45 5800 500
    0.5 2.6 49 7050 500
    0.5 2.7 54 8650 500
    0.5 2.9 60 11075 500
    0.5 3.1 66 13600 250
    0.5 3.4 75 17250 250
    0.8 3.7 84 22475 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    sm : Sectoral Stranded
    3 cores : Red, Yellow, Blue
    31/2 cores : Red, Yellow, Blue, Black
    4 Cores : Blue, Brown, Black, Grey Overall diameter -2%, +8%
    Packing ±5%

    For 31/2 core, neutral conductors are round stranded.
    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 228.
     
  • XLPE Insulated LSF Sheathed Cables (IEC 60502 - 1), ALUMINIUM CONDUCTORS

    XLPE INSULATED, LSF SHEATHED CABLES 

    Aluminium Conductor

    STANDARD : IEC 60502-1

    600 / 1000 VOLTS

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     1x16 rm 7 5 0.7
     1x25 rm 7 6.3 0.9
     1x35 rm 7 7.41 0.9
     1x50 rm 19 8.75 1.0
     1x70 rm 19 10.55 1.1
     1x95 rm 19 12.4 1.1
     1x120 rm 37 14 1.2
     1x150 rm 37 15.5 1.4
     1x185 rm 37 17.4 1.6
     1x240 rm 61 19.9 1.7
     1x300 rm 61 22.2 1.8
     1x400 rm 61 25.2 2.0
     1x500 rm 61 28.6 2.2
     1x630 rm 91 32.6 2.4

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
    1.4 10 110 1000
    1.4 11 150 1000
    1.4 12 200 1000
    1.4 14 250 1000
    1.4 16 325 1000
    1.5 18 425 1000
    1.5 20 525 1000
    1.6 22 650 1000
    1.6 24 775 1000
    1.7 27 1000 500
    1.8 30 1200 500
    1.9 33 1525 500
    2.0 37 1925 500
    2.2 42 2475 500

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     2x16 rm 7 5 0.7
     2x25 rm 7 6.3 0.9
     2x35 rm 7 7.41 0.9

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
     1.8 19 450 1000
     1.8 23 625 1000
     1.8 25 775 1000
    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     3x16 rm 7 5 0.7
     3x25 rm 7 6.3 0.9
     3x35 rm 7 7.41 0.9
     3x50 sm 6 - 1.0
     3x70 sm 12 - 1.1
     3x95 sm 15 - 1.1
     3x120 sm 15 - 1.2
     3x150 sm 15 - 1.4
     3x185 sm 30 - 1.6
     3x240 sm 30 - 1.7
     3x300 sm 30 - 1.8
     3x400 sm 53 - 2.0
     3x500 sm 53 - 2.2

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
    1.8 20 500 1000
    1.8 24 700 1000
    1.8 26 750 1000
    1.8 27 800 500
    1.9 31 1100 500
    2.0 34 1400 500
    2.1 37 1675 500
    2.3 42 2100 500
    2.4 46 2550 250
    2.6 51 3275 250
    2.8 56 3975 250
    3.1 64 5025 250
    3.3 71 6350 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    rm : Round Stranded
    sm : Sectoral Stranded
    1 core : Black (Red on request)
    2 cores : Red, Black
    3 cores : Red, Yellow, Blue
    1 core : Brown or Blue
    2 cores : Brown, Blue
    3 cores : Brown, Black, Grey
    Overall diameter -2%, +8%
    Packing ±5%

    Single core cables are Aluminium Armoured as per IEC 60502-1 recommendation.
    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 228.
     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
      Ph Ne Ph Ne Ph Ne
     3x25 rm+16 7 7 6.3 4.98 0.9 0.7
     3x35 sm+16 6 7 - 4.98 0.9 0.7
     3x50 sm+25 6 7 - 6.30 1.0 0.9
     3x70 sm+35 12 7 - 7.41 1.1 0.9
     3x95 sm+50 15 19 - 8.75 1.1 1.0
     3x120 sm+70 15 19 - 10.55 1.2 1.1
     3x150 sm+70 15 19 - 10.55 1.4 1.1
     3x185 sm+95 30 19 - 12.40 1.6 1.1
     3x240 sm+120 30 37 - 14.00 1.7 1.2
     3x300 sm+150 30 37 - 15.47 1.8 1.4
     3x400 sm+185 53 37 - 17.36 2.0 1.6
     3x500 sm+240 53 61 - 19.89 2.2 1.7

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
    1.8 25 775 1000
    1.8 25 750 500
    1.8 29 950 500
    1.9 33 1275 500
    2.1 37 1650 500
    2.2 40 2000 500
    2.3 45 2425 500
    2.5 50 3000 250
    2.7 55 3850 250
    2.9 61 4650 250
    3.1 68 5875 250
    3.4 76 7425 250

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     4x16 rm 7 4.98 0.7
     4x25 rm 7 6.3 0.9
     4x35 sm 6 - 0.9
     4x50 sm 6 - 1.0
     4x70 sm 12 - 1.1
     4x95 sm 15 - 1.1
     4x120 sm 15 - 1.2
     4x150 sm 15 - 1.4
     4x185 sm 30 - 1.6
     4x240 sm 30 - 1.7
     4x300 sm 30 - 1.8
     4x400 sm 53 - 2.0
     4x500 sm 53 - 2.2

    UNARMOURED
    Nominal Sheath thickness Approx. Overall diameter Approx. Weight Packing
    mm mm Kg/Km meters
    1.8 22 600 1000
    1.8 26 850 1000
    1.8 26 800 500
    1.9 30 1025 500
    2.0 34 1375 500
    2.1 38 1775 500
    2.3 43 2200 500
    2.4 47 2675 500
    2.6 52 3275 250
    2.8 58 4225 250
    3.0 64 5100 250
    3.3 73 6550 250
    3.5 80 8175 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    sm : Sectoral Stranded
    Ph : Phase Conductor
    Ne : Neutral Conductor
    3 1/2 Cores : Red, Yellow, Blue, Black
    4 cores : Red, Yellow, Blue, Black
    3 1/2 Cores : Blue, Brown, Black, Grey
    4 Cores : Blue, Brown, Black, Grey
    Overall diameter -2%, +8%
    Packing ±5%

    For 3 1/2 cores, neutral conductors are round stranded
    For sectoral conductors, number of wires mentioned is minimum of wires in accordance with IEC 228. 

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     1x16 rm 7 5 0.7
     1x25 rm 7 6.3 0.9
     1x35 rm 7 7.41 0.9
     1x50 rm 19 8.75 1.0
     1x70 rm 19 10.55 1.1
     1x95 rm 19 12.4 1.1
     1x120 rm 37 14 1.2
     1x150 rm 37 15.5 1.4
     1x185 rm 37 17.4 1.6
     1x240 rm 61 19.9 1.7
     1x300 rm 61 22.2 1.8
     1x400 rm 61 25.2 2.0
     1x500 rm 61 28.6 2.2
     1x630 rm 91 32.6 2.4

    ALUMINIUM WIRE ARMOURED
    Nominal Alum Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    - - - - -
    - - - - -
    - - - - -
    1.25 1.8 19 500 1000
    1.25 1.8 21 600 500
    1.25 1.8 23 725 500
    1.6 1.8 26 900 500
    1.6 1.8 27 1025 500
    1.6 1.8 30 1225 500
    1.6 1.9 33 1475 500
    1.6 1.9 35 1725 500
    2.0 2.1 40 2275 500
    2.0 2.2 44 2750 250
    2.0 2.3 49 3350 250
    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     2x16 rm 7 5 0.7
     2x25 rm 7 6.3 0.9
     2x35 rm 7 7.41 0.9

    STEEL WIRE ARMOURED
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    1.25 1.8 22 850 1000
    1.6 1.8 26 1265 1000
    1.6 1.8 28 1475 1000

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     3x16 rm 7 5 0.7
     3x25 rm 7 6.3 0.9
     3x35 rm 7 7.41 0.9
     3x50 sm 6 - 1.0
     3x70 sm 12 - 1.1
     3x95 sm 15 - 1.1
     3x120 sm 15 - 1.2
     3x150 sm 15 - 1.4
     3x185 sm 30 - 1.6
     3x240 sm 30 - 1.7
     3x300 sm 30 - 1.8
     3x400 sm 53 - 2.0
     3x500 sm 53 - 2.2

    STEEL WIRE ARMOURED
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    1.25 1.8 23 925 1000
    1.6 1.8 27 1375 1000
    1.6 1.8 30 1475 500
    1.6 1.9 30 1575 500
    2.0 2.0 35 2200 500
    2.0 2.2 38 2675 500
    2.0 2.3 42 3075 500
    2.5 2.5 47 4050 250
    2.5 2.6 51 4675 250
    2.5 2.8 57 5675 250
    2.5 3.0 62 6575 250
    2.5 3.3 70 8000 250
    3.15 3.5 78 10450 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    rm : Round Stranded
    sm : Sectoral Stranded
    1 core : Black (Red on request)
    2 cores : Red, Black
    3 cores : Red, Yellow, Blue
    1 core : Brown or Blue
    2 cores : Brown, Blue
    3 cores : Brown, Black, Grey
    Overall diameter -2%, +8%
    Packing ±5%


    Single core cables are Aluminium Armoured as per IEC 60502-1 recommendation.
    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 228.
     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
      Ph Ne Ph Ne Ph Ne
     3x25 rm+16 7 7 6.3 4.98 0.9 0.7
     3x35 sm+16 6 7 - 4.98 0.9 0.7
     3x50 sm+25 6 7 - 6.30 1.0 0.9
     3x70 sm+35 12 7 - 7.41 1.1 0.9
     3x95 sm+50 15 19 - 8.75 1.1 1.0
     3x120 sm+70 15 19 - 10.55 1.2 1.1
     3x150 sm+70 15 19 - 10.55 1.4 1.1
     3x185 sm+95 30 19 - 12.40 1.6 1.1
     3x240 sm+120 30 37 - 14.00 1.7 1.2
     3x300 sm+150 30 37 - 15.47 1.8 1.4
     3x400 sm+185 53 37 - 17.36 2.0 1.6
     3x500 sm+240 53 61 - 19.89 2.2 1.7

    STEEL WIRE ARMOURED
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    1.6 1.8 28 1475 500
    1.6 1.8 28 1450 500
    1.6 1.9 32 1775 500
    2.0 2.1 37 2475 500
    2.0 2.2 41 2975 500
    2.0 2.4 45 3500 500
    2.5 2.5 50 4510 250
    2.5 2.7 55 5300 250
    2.5 2.9 61 6400 250
    2.5 3.0 66 7400 250
    3.15 3.4 76 9875 250
    3.15 3.6 83 11875 250

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     4x16 rm 7 4.98 0.7
     4x25 rm 7 6.3 0.9
     4x35 sm 6 - 0.9
     4x50 sm 6 - 1.0
     4x70 sm 12 - 1.1
     4x95 sm 15 - 1.1
     4x120 sm 15 - 1.2
     4x150 sm 15 - 1.4
     4x185 sm 30 - 1.6
     4x240 sm 30 - 1.7
     4x300 sm 30 - 1.8
     4x400 sm 53 - 2.0
     4x500 sm 53 - 2.2

    STEEL WIRE ARMOURED
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    1.6 1.8 25 1200 1000
    1.6 1.8 29 1575 500
    1.6 1.9 30 1550 500
    1.6 2.0 33 1875 500
    2.0 2.2 39 2650 500
    2.0 2.3 43 3175 500
    2.5 2.5 48 4175 250
    2.5 2.6 52 4850 250
    2.5 2.8 57 5650 250
    2.5 3.0 64 6900 250
    2.5 3.2 70 8175 250
    3.15 3.5 80 10950 250
    3.15 3.8 88 13000 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    sm : Sectoral Stranded
    Ph : Phase Conductor
    Ne : Neutral Conductor
    3 1/2 Cores : Red, Yellow, Blue, Black
    4 cores : Red, Yellow, Blue, Black
    3 1/2 Cores : Blue, Brown, Black, Grey
    4 Cores : Blue, Brown, Black, Grey
    Overall diameter -2%, +8%
    Packing ±5%

    For 3 1/2 cores, neutral conductors are round stranded
    For sectoral conductors, number of wires mentioned is minimum of wires in accordance with IEC 228. 

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     1x400 rm 61 25.2 2.0
     1x500 rm 61 28.6 2.2
     1x630 rm 91 32.6 2.4
     1x16 rm 7 5 0.7
     1x25 rm 7 6.3 0.9
     1x35 rm 7 7.41 0.9
     1x50 rm 19 8.75 1.0
     1x70 rm 19 10.55 1.1
     1x95 rm 19 12.4 1.1
     1x120 rm 37 14 1.2
     1x150 rm 37 15.5 1.4
     1x185 rm 37 17.4 1.6
     1x240 rm 61 19.9 1.7
     1x300 rm 61 22.2 1.8

    ALUMINIUM TAPE ARMOURED
    Nominal Alum Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.5 2.0 38 1950 500
    0.5 2.1 42 2400 250
    0.5 2.3 47 3000 250
    - - - - -
    - - - - -
    - - - - -
    0.5 1.8 19 450 500
    0.5 1.8 21 550 500
    0.5 1.8 23 675 500
    0.5 1.8 24 775 500
    0.5 1.8 26 900 500
    0.5 1.8 29 1075 500
    0.5 1.8 31 1300 500
    0.5 1.9 34 1550 500

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     2x16 rm 7 5 0.7
     2x25 rm 7 6.3 0.9
     2x35 rm 7 7.41 0.9

    STEEL TAPE ARMOURED
    Nominal Steel Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.2 1.8 20 550 1000
    0.2 1.8 24 750 1000
    0.2 1.8 26 925 500
    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     3x16 rm 7 5 0.7
     3x25 rm 7 6.3 0.9
     3x35 rm 7 7.41 0.9
     3x50 sm 6 - 1.0
     3x70 sm 12 - 1.1
     3x95 sm 15 - 1.1
     3x120 sm 15 - 1.2
     3x150 sm 15 - 1.4
     3x185 sm 30 - 1.6
     3x240 sm 30 - 1.7
     3x300 sm 30 - 1.8
     3x400 sm 53 - 2.0
     3x500 sm 53 - 2.2

    STEEL TAPE ARMOURED
    Nominal Steel Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.2 1.8 21 625 1000
    0.2 1.8 25 850 1000
    0.2 1.8 27 900 500
    0.2 1.8 28 975 500
    0.2 2.0 32 1300 500
    0.2 2.1 35 1625 500
    0.5 2.3 40 2300 500
    0.5 2.4 44 2775 250
    0.5 2.6 48 3300 250
    0.5 2.7 54 4100 250
    0.5 2.9 59 4875 250
    0.5 3.2 66 6050 250
    0.5 3.4 73 7475 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    rm : Round Stranded
    sm : Sectoral Stranded
    1 core : Black (Red on request)
    2 cores : Red, Black
    3 cores : Red, Yellow, Blue
    1 core : Brown or Blue
    2 cores : Brown, Blue
    3 cores : Brown, Black, Grey
    Overall diameter -2%, +8%
    Packing ±5%

    Single core cables are Aluminium Armoured as per IEC 60502-1 recommendation.
    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 228.
     

     

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    Ph Ne Ph Ne Ph Ne
     3x25 rm+16 7 7 6.3 4.98 0.9 0.7
     3x35 sm+16 6 7 - 4.98 0.9 0.7
     3x50 sm+25 6 7 - 6.30 1.0 0.9
     3x70 sm+35 12 7 - 7.41 1.1 0.9
     3x95 sm+50 15 19 - 8.75 1.1 1.0
     3x120 sm+70 15 19 - 10.55 1.2 1.1
     3x150 sm+70 15 19 - 10.55 1.4 1.1
     3x185 sm+95 30 19 - 12.40 1.6 1.1
     3x240 sm+120 30 37 - 14.00 1.7 1.2
     3x300 sm+150 30 37 - 15.47 1.8 1.4
     3x400 sm+185 53 37 - 17.36 2.0 1.6
     3x500 sm+240 53 61 - 19.89 2.2 1.7

    STEEL TAPE ARMOURED
    Nominal Steel Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.2 1.8 26 925 500
    0.2 1.8 26 885 500
    0.2 1.9 30 1125 500
    0.2 2.0 34 1485 500
    0.5 2.2 39 2225 500
    0.5 2.3 43 2650 500
    0.5 2.5 47 3175 250
    0.5 2.6 52 3800 250
    0.5 2.8 58 4725 250
    0.5 3.0 63 5625 250
    0.5 3.3 71 7000 250
    0.8 3.5 78 8650 250

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     4x16 rm 7 4.98 0.7
     4x25 rm 7 6.3 0.9
     4x35 sm 6 - 0.9
     4x50 sm 6 - 1.0
     4x70 sm 12 - 1.1
     4x95 sm 15 - 1.1
     4x120 sm 15 - 1.2
     4x150 sm 15 - 1.4
     4x185 sm 30 - 1.6
     4x240 sm 30 - 1.7
     4x300 sm 30 - 1.8
     4x400 sm 53 - 2.0
     4x500 sm 53 - 2.2

    STEEL TAPE ARMOURED
    Nominal Steel Tape dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.2 1.8 23 725 1000
    0.2 1.8 27 1000 500
    0.2 1.8 27 950 500
    0.2 1.9 31 1200 500
    0.2 2.1 35 1600 500
    0.5 2.3 41 2400 500
    0.5 2.4 45 2875 250
    0.5 2.6 50 3450 250
    0.5 2.7 54 4000 250
    0.5 2.9 60 5150 250
    0.5 3.1 66 6125 250
    0.5 3.4 75 7700 250
    0.8 3.7 84 10250 250
      Colour Code ( 1 ) Colour Code ( 2 ) Tolerance range :
    re : Round Solid 
    rm : Round Stranded
    sm : Sectoral Stranded
    Ph : Phase Conductor
    Ne : Neutral Conductor
    3 1/2 Cores : Red, Yellow, Blue, Black
    4 cores : Red, Yellow, Blue, Black
    3 1/2 Cores : Blue, Brown, Black, Grey
    4 Cores : Blue, Brown, Black, Grey
    Overall diameter -2%, +8%
    Packing ±5%

    For 3 1/2 cores, neutral conductors are round stranded
    For sectoral conductors, number of wires mentioned is minimum of wires in accordance with IEC 228. 
  • XLPE Insulated LSF Sheathed Cables (BS 6724), COPPER CONDUCTORS

    XLPE INSULATED, LSF SHEATHED CABLES 

    Copper Conductor

    STANDARD : BS 6724

    0.6 / 1 kV

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     1x50 rm 19 8.8 1.0
     1x70 rm 19 10.6 1.1
     1x95 rm 19 12.4 1.1
     1x120 rm 37 14.0 1.2
     1x150 rm 37 15.5 1.4
     1x185 rm 37 17.4 1.6
     1x240 rm 61 20.0 1.7
     1x300 rm 61 22.5 1.8
     1x400 rm 61 25.4 2.0
     1x500 rm 61 28.5 2.2
     1x630 rm 91 32.8 2.4
     1x800 rm 91 37.0 2.6
     1x1000 rm 91 41.0 2.8
    ALUMINIUM WIRE ARMOURED
    Nominal Alum Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.9 1.5 18 700 1000
    1.25 1.5 20 1000 1000
    1.25 1.6 22 1250 1000
    1.25 1.6 24 1550 1000
    1.6 1.7 27 1900 1000
    1.6 1.8 30 2350 1000
    1.6 1.8 33 2950 500
    1.6 1.9 35 3600 500
    2.0 2.0 40 4650 500
    2.0 2.1 44 5775 500
    2.0 2.2 49 7300 500
    2.5 2.4 55 9400 500
    2.5 2.5 60 11550 500

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     2x1.5 rm 7 1.56 0.6
     2x2.5 rm 7 2.01 0.7
     2x4 rm 7 2.55 0.7
     2x6 rm 7 3.1 0.7
     2x10 rm 7 4.0 0.7
     2x16 rm 7 5.0 0.7
     2x25 rm 7 6.3 0.9
     2x35 rm 7 7.4 0.9

    STEEL WIRE ARMOURED CABLES
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.9 1.3 12 300 1000
    0.9 1.4 13 325 1000
    0.9 1.4 15 450 1000
    0.9 1.4 16 525 1000
    0.9 1.5 18 700 1000
    1.25 1.5 21 1000 1000
    1.25 1.6 24 1400 1000
    1.6 1.7 28 1900 1000
     Colour Code ( 1 )Colour Code ( 2 )
    rm : Round Stranded
    1 core : Black (Red on request)
    2 cores : Red, Black
    1 core : Brown or Blue
    2 cores : Brown, Blue

    Single Core Cables are Aluminium Wire Armoured as per BS 5467 recommendation 

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     3x1.5 rm 7 1.56 0.6
     3x2.5 rm 7 2.01 0.7
     3x4 rm 7 2.55 0.7
     3x6 rm 7 3.12 0.7
     3x10 rm 7 4.01 0.7
     3x16 rm 7 5.03 0.7
     3x25 rm 7 6.3 0.9
     3x35 rm 7 7.44 0.9
     3x50 sm 6 - 1.0
     3x70 sm 12 - 1.1
     3x95 sm 15 - 1.1
     3x120 sm 18 - 1.2
     3x150 sm 18 - 1.4
     3x185 sm 30 - 1.6
     3x240 sm 34 - 1.7
     3x300 sm 34 - 1.8
     3x400 sm 53 - 2.0
    STEEL WIRE ARMOURED CABLES
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.9 1.3 13 325 1000
    0.9 1.4 14 425 1000
    0.9 1.4 16 500 1000
    0.9 1.4 17 600 1000
    1.25 1.5 20 900 1000
    1.25 1.6 22 1200 1000
    1.6 1.7 27 1850 1000
    1.6 1.8 30 2150 1000
    1.6 1.8 30 2450 1000
    1.6 1.9 33 3200 500
    2.0 2.1 38 4400 500
    2.0 2.2 42 5250 500
    2.5 2.3 47 6750 500
    2.5 2.4 51 8050 500
    2.5 2.6 56 10000 500
    2.5 2.7 61 12100 500
    2.5 2.9 68 15000 500

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    Ph Ne Ph Ne Ph Ne
     3x25 rm+16 7 7 6.3 5.03 0.9 0.7
     3x35 sm+16 6 7 - 5.03 0.9 0.7
     3x50 sm+25 6 7 - 6.3 1.0 0.9
     3x70 sm+35 12 7 - 7.44 1.1 0.9
     3x95 sm+50 15 19 - 8.8 1.1 1.0
     3x120 sm+70 18 19 - 10.60 1.2 1.1
     3x150 sm+70 18 19 - 10.60 1.4 1.1
     3x185 sm+95 30 19 - 12.40 1.6 1.1
     3x240 sm+120 34 37 - 14.0 1.7 1.2
     3x300 sm+150 34 37 - 15.50 1.8 1.4
     3x400 sm+185 53 37 - 17.40 2.0 1.6

    STEEL WIRE ARMOURED CABLES
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    1.6 1.7 28 2000 1000
    1.6 1.8 28 2200 1000
    1.6 1.9 32 2800 500
    2.0 2.0 37 3950 500
    2.0 2.1 41 5000 500
    2.0 2.2 44 6050 500
    2.5 2.4 50 7600 500
    2.5 2.5 55 9250 500
    2.5 2.6 60 11500 500
    2.5 2.8 65 13850 500
    2.5 3.0 73 17200 500
     Colour Code ( 1 )Colour Code ( 2 )
    rm : Round Stranded
    sm : Sectoral Stranded
    Ph : Phase
    Ne : Neutral
    3 cores : Red, Yellow, Blue
    31/2 cores : Red, Yellow, Blue, Black
    3 cores : Brown, Black, Grey
    3 1/2 cores : Blue, Brown, Black, Grey

    For 31/2 core, above 35 mm² size of phase, neutral conductors are round stranded.
    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 60228.
     

     

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     4x1.5 rm 7 1.56 0.6
     4x2.5 rm 7 2.01 0.7
     4x4 rm 7 2.55 0.7
     4x6 rm 7 3.12 0.7
     4x10 rm 7 4.01 0.7
     4x16 rm 7 5.03 0.7
     4x25 rm 7 6.3 0.9
     4x35 sm 6 7.44 0.9
     4x50 sm 6 - 1.0
     4x70 sm 12 - 1.1
     4x95 sm 15 - 1.1
     4x120 sm 18 - 1.2
     4x150 sm 18 - 1.4
     4x185 sm 30 - 1.6
     4x240 sm 34 - 1.7
     4x300 sm 34 - 1.8
     4x400 sm 53 - 2.0
    STEEL WIRE ARMOURED CABLES
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.9 1.3 14 375 1000
    0.9 1.4 15 475 1000
    0.9 1.4 17 575 1000
    1.25 1.5 19 800 1000
    1.25 1.5 21 1050 1000
    1.25 1.6 24 1400 1000
    1.6 1.7 29 2200 1000
    1.6 1.8 29 2400 1000
    1.6 1.9 33 3050 500
    2.0 2.1 39 4300 500
    2.0 2.2 42 5500 500
    2.5 2.3 47 7050 500
    2.5 2.4 52 8450 500
    2.5 2.6 57 10200 500
    2.5 2.7 63 12750 500
    2.5 2.9 69 15450 500
    3.15 3.2 79 20250 500

     

    CABLE CORE(S)
    Nominal Area No or wires Approx Conductor Diameter Nominal Insulation thickness
    mm² No. mm mm
     5x1.5 rm 7 1.56 0.6
     5x2.5 rm 7 2.01 0.7
     5x4 rm 7 2.55 0.7
     5x6 rm 7 3.12 0.7
     5x10 rm 7 4.01 0.7
     5x16 rm 7 5.03 0.7
     5x25 rm 7 6.3 0.9
     5x35 rm 7 7.44 0.9
     5x50 sm 19 8.8 1.0
     5x70 sm 19 10.6 1.0

    STEEL WIRE ARMOURED CABLES
    Nominal Steel Wire dia. Nominal Sheath thickness Approx. Overall Diameter Approx. Weight Packing
    mm mm mm Kg/Km meters
    0.9 1.4 15 425 1000
    0.9 1.4 16 550 1000
    0.9 1.5 18 675 1000
    1.25 1.5 20 925 1000
    1.25 1.6 23 1250 1000
    1.6 1.7 27 1850 1000
    1.6 1.8 32 2600 500
    1.6 1.9 35 3100 500
    2.0 2.0 40 4200 500
    2.0 2.2 46 5600 500
     Colour Code ( 1 )Colour Code ( 2 )
    rm : Round Stranded
    sm : Sectoral Stranded
    4 cores : Red, Yellow, Blue, Black
    5 cores : Red, Yellow, Blue, Black, Green/Yellow
    4 cores : Blue, Brown, Black, Grey
    5 cores : Green/Yellow, Blue, Brown, Black, Grey

    For sectoral conductors, number of wires mentioned is minimum number of wires in accordance with IEC 60228.
  • Electrical Characteristics

    XLPE INSULATED, LSF SHEATHED CABLES 

    Copper Conductor

    600 / 1000 VOLTS

    LOW VOLTAGE SINGLE CORE CABLE ( IN TREFOIL FORMATION )

     LINEAR RESISTANCE, REACTANCE AND VOLTAGE DROP 

     XLPE INSULATED (90°C) COPPER CONDUCTOR

    SIZE
    mm²
    R (DC)
    20
    R (DC)
    90
    R (AC)
    90
    X Z
    90
    VD
    1.5 12.1 15.43 15.43 0.165 15.43 21.43
    2.5 7.41 9.45 9.45 0.149 9.45 13.85
    4 4.61 5.88 5.88 0.143 5.88 8.30
    6 3.08 3.93 3.93 0.134 3.93 5.58
    10 1.83 2.333 2.333 0.132 2.337 3.37
    16 1.15 1.466 1.466 0.124 1.471 2.16
    25 0.727 0.927 0.927 0.121 0.935 1.41
    35 0.524 0.668 0.669 0.115 0.679 1.046
    50 0.387 0.493 0.494 0.111 0.506 0.800
    70 0.268 0.342 0.343 0.105 0.359 0.584
    95 0.193 0.246 0.248 0.103 0.269 0.451
    120 0.153 0.195 0.197 0.100 0.221 0.377
    150 0.124 0.158 0.160 0.100 0.189 0.326
    185 0.0991 0.126 0.129 0.099 0.163 0.282
    240 0.0754 0.0961 0.0993 0.097 0.139 0.238
    300 0.0601 0.0766 0.0812 0.096 0.126 0.212
    400 0.0470 0.0599 0.0636 0.094 0.114 0.186
    500 0.0366 0.0467 0.0513 0.092 0.105 0.167
    630 0.0283 0.0361 0.0420 0.091 0.100 0.153

     

    LOW VOLTAGE MULTI CORE CABLE

     LINEAR RESISTANCE, REACTANCE AND VOLTAGE DROP

     XLPE INSULATED (90°C) COPPER CONDUCTOR

    SIZE
    mm²
    R (DC)
    20
    R (DC)
    90
    R (AC)
    90
    X Z
    90
    VD
    1.5 12.1 15.43 15.43 0.165 15.43 21.55
    2.5 7.41 9.45 9.45 0.143 9.45 13.24
    4 4.61 5.88 5.88 0.132 5.88 8.28
    6 3.08 3.93 3.93 0.121 3.93 5.57
    10 1.83 2.333 2.333 0.109 2.336 3.35
    16 1.15 1.466 1.466 0.106 1.470 2.14
    25 0.727 0.927 0.927 0.103 0.933 1.39
    35 0.524 0.668 0.669 0.098 0.676 1.03
    50 0.387 0.493 0.494 0.098 0.504 0.786
    70 0.268 0.342 0.343 0.095 0.356 0.574
    95 0.193 0.246 0.248 0.093 0.264 0.440
    120 0.153 0.195 0.197 0.091 0.217 0.370
    150 0.124 0.158 0.160 0.091 0.184 0.316
    185 0.0991 0.126 0.129 0.091 0.1579 0.273
    240 0.0754 0.0961 0.0993 0.090 0.134 0.231
    300 0.0601 0.0766 0.0812 0.090 0.1212 0.206
    400 0.0470 0.0599 0.0636 0.089 0.1094 0.181
    500 0.0366 0.0467 0.0513 0.088 0.1019 0.163
    630 0.0283 0.0361 0.0420 0.088 0.0975 0.150

     

    R(DC)  :
    20
    Direct Current Resistance at 20°C, Ohm/Km X  : Reactance, Ohm / Km
    R(DC)  :
    90
    Direct Current Resistance at 90°C, Ohm/Km Z  : Impedance, Ohm / Km
    R(AC)  :
    90
    Alternating Current Resistance at 90°C, Ohm/Km VD  : Voltage Drop (Phase to Phase), V/A.Km

     

    XLPE INSULATED, LSF SHEATHED CABLES 

    Aluminium Conductor

    600 / 1000 VOLTS

     

    LOW VOLTAGE SINGLE CORE CABLE ( IN TREFOIL FORMATION )

     LINEAR RESISTANCE, REACTANCE AND VOLTAGE DROP 

    XLPE INSULATED (90°C) ALUMINIUM CONDUCTOR

    SIZE
    mm²
    R (DC)
    20
    R (DC)
    90
    R (AC)
    90
    X Z
    90
    VD
    16 1.91 2.449 2.449 0.124 2.452 3.522
    25 1.20 1.539 1.539 0.121 1.544 2.258
    35 0.868 1.113 1.113 0.115 1.119 1.662
    50 0.641 0.822 0.822 0.111 0.829 1.254
    70 0.443 0.568 0.568 0.105 0.578 0.896
    95 0.320 0.410 0.411 0.103 0.424 0.677
    120 0.253 0.324 0.325 0.100 0.340 0.554
    150 0.206 0.264 0.265 0.100 0.283 0.471
    185 0.164 0.210 0.211 0.099 0.233 0.395
    240 0.125 0.160 0.162 0.097 0.189 0.325
    300 0.100 0.128 0.130 0.096 0.162 0.280
    400 0.0778 0.100 0.102 0.094 0.139 0.239
    500 0.0605 0.078 0.081 0.092 0.123 0.208
    630 0.0469 0.060 0.064 0.091 0.111 0.183

     

    LOW VOLTAGE MULTI CORE CABLE ( IN TREFOIL FORMATION ) 

    LINEAR RESISTANCE, REACTANCE AND VOLTAGE DROP 

    XLPE INSULATED (90°C) ALUMINIUM CONDUCTOR

    SIZE
    mm²
    R (DC)
    20
    R (DC)
    90
    R (AC)
    90
    X Z
    90
    VD
    16 1.91 2.449 2.449 0.106 2.451 3.504
    25 1.20 1.539 1.539 0.103 1.542 2.240
    35 0.868 1.113 1.113 0.098 1.117 1.644
    50 0.641 0.822 0.822 0.098 0.828 1.241
    70 0.443 0.568 0.568 0.095 0.576 0.886
    95 0.32 0.410 0.411 0.093 0.421 0.666
    120 0.253 0.324 0.325 0.091 0.337 0.545
    150 0.206 0.264 0.265 0.091 0.280 0.462
    185 0.164 0.210 0.211 0.091 0.230 0.387
    240 0.125 0.160 0.162 0.090 0.185 0.318
    300 0.100 0.128 0.130 0.090 0.158 0.274
    400 0.0778 0.100 0.102 0.089 0.135 0.234
    500 0.0605 0.078 0.081 0.088 0.120 0.204
    630 0.0469 0.060 0.064 0.088 0.109 0.180

     

    R(DC)  :
    20
    Direct Current Resistance at 20°C, Ohm/Km X  : Reactance, Ohm / Km
    R(DC)  :
    90
    Direct Current Resistance at 90°C, Ohm/Km Z  : Impedance, Ohm / Km
    R(AC)  :
    90
    Alternating Current Resistance at 90°C, Ohm/Km VD  : Voltage Drop (Phase to Phase), V/A.Km

  • Drum Handling Instructions

    Cables and Conductors should be installed by trained personnel in accordance with good engineering practices, recognized codes of practice, statutory local requirements, IEE wiring regulations and where relevant, in accordance with any specific instructions issued by the company. Cables are often supplied in heavy cable reels and handling these reels can constitute a safety hazard. In particulat, dangers may arise during the removal of steel binding straps and during the removal of retaining battens and timbers which may expose projecting nails.