03:00
 Home » Products » Copper Telephone Cables  ¤ Sitemap ¤  
  » Energy Cables
 »   Wires
 »   LV Cables
 »   Control Cables
 »   LV Lead Sheathed
 »   LSF Cables
 »   MV Cables
 »   MV Lead Sheathed
 »   HV Cables
 »   Overhead Lines

  » Communication
 »   Telephone Cables
 »   Optical Fibre Cables

 »   Copper Rods
 »   PVC Compounds

NOTICE! RCGC catalogues under circulation are still valid. Some International and National Standards mentioned in RCGC Catalogues.. <more>

Contact Us
 
 Riyadh Cables
 Search our Site!   
[ + ] - [ -
Copper Telephone Cables

RIYADH TELEPHONE CABLES produces all Types of Telephone Cables with plane soft annealed copper conductor and tinned coated copper conductor. These cables consist of Solid PE, Cellular PE, Cellular /Solid PE or PVC. They may be with or without metal screening, armored or unarmored, air core or jelly filled, duct or direct buried for use as primary or secondary purpose. These cables can be self-supporting for use in hill areas or where it is difficult to dig the ground. Fire retardant or low smoke/halogen free as Indoor cables/wires; drop wires and jumper wires for internal use.

Based on HIGH TECHNOLOGY manufacturing process and the MOST-UP-TO-DATE production facilities incorporating Robot Reel Handling system and with the COMMITMENT TO HIGH QUALITY Riyadh Telephone Cables Co. started production in 1994.

RIYADH TELEPHONE CABLES produces all types and sizes of telephone cable up to 3600 pairs in accordance with Saudi MOPTT/STC, Yemen, Pakistan Telecom, Qatar, Jordan, UAE Etisalat, Sudan, Iran, Iraq, Bahrain, Oman, Egypt, Cyprus, Kenya, Tanzania, Ethiopia specifications as well as the following international standards.

  • IEC, International
  • VDE, Germany
  • NFC, France
  • REA, U.S.A
  • BS, United Kingdom.
  • UAE Etisalat
  • Lebanon (Ogero)
  • Oman
  • Qatar
  • Kuwait
  • and any other specification as per the customer's requirements.
Standard Products
  • Air-Core Telephone Cables.
  • Jelly-Filled Telephone Cables.
  • Self Supporting Aerial Telephone Cables.
  • Indoor PVC Telephone Cables.
  • Buried Service Telephone Cables.
  • Indoor Telephone Wires.
  • Jumper Wires.
  • Drop Wires.
  • Pilot Cables.
 

Types of Copper Telephone Cables

01..
 
02..
 
03..
 
04..
 
05..
 
06..
 
07..
 
08..
 
09..
 
10..
  Fiber optic Cables (Outdoor direct buried or Duct Type and Indoor Cables)

11..
  Pilot Cables

 PROCESS FLOW CHART
MILE STONE
APPLICABLE MATERIAL MANUFACTURING PROCESS DESCRIPTION
- Copper Wire HEAVY DRAWING - Drawn from 8.00mm to 2.6mm
- Polyethylene
 - Solid
 - Cellular
 - Foam Skin
*1.Drawing
2.Annealing
3.Insulating
1. Drawn Copper Conductor. Min. 0.4mm dia. Max. 0.9mm dia.
2. Conductor is annealed continuously by electrical heat.
3. Conductor is insulated with Polyethylene.
Pair twisting
OR
Quad Twisting
- Two Insulated conductors are twisted into a pair
OR
- Four insulated conductors are twisted into a star-quad
- Binding Tape Sub-Unit Stranding - 10 pairs subunit OR
- 25 pairs subunit OR
- 5 quads subunit
Intermediate
Inspection
Subunits are inspected according to the specifications
- Filling Compound
- Binding Tape
*1.Laying-up
2.Filling
- Specified no. of subunits are laid up into a unit.
- Specified no. of units are laid up into a cable core.
- Cable cores are filled with filling compound.
- Core wrapping tape applied helically
Intermediate
Inspection
Units and cable cores are inspected according to the specifications.
- Filling Compound
- Lap Tape
- Identification Tape
- Black Polyethylene
*1.Filling
2.Lap Serving
3.Sheathing
1.Cables cores are filled with compound.
2.Filled cores are served with Lap tape longitudinally applied.
3.Lap served cable cores are sheathed with polyethylene.
Final Inspection Finished cables are inspected finally according to the specifications.
Shipping
* The MARK means that all manufacturing processes are in tandem operation.
 
 QUALITY CONTROL
MEETING CUSTOMER SATISFACTION
Commitment to Quality Control at all production stages as well as personnel activities.
Quality control includes the following inspections and testing:
  1. In-coming raw material inspection.
  2. On-line testing and control equipment.
  3. In-between process testing of subunits, units and cables cores.
  4. Final testing equipment for low frequency and high frequency cable characteristics.
  5. Statistical records for the testing standards.
 QUALITY ASSURANCE POLICY
ZERO DEFECT
  1. Specify quality target data.
  2. Recognize problems.
  3. Analyze
  4. Identify problem solution.
  5. Formulate action plan.
  6. Implement action plan.
  7. Check for success.
  8. Set new quality target data.
  9. Zero defect.

» Contact Webmaster
Riyadh Cables Logos
| Home |  About Us  |  Email Us  |  Contact Us  |  Site Map  |  Jobs  |
© 2008 Riyadh Cables Group of Companies : All Rights Reserved
| This page is best viewed in screen resolution 1024x768 | Developed and Designed by Riyadh Cables Webmaster : noel.m.r.i |